| UPS Management SoftwarePlease read to understand the different versions of the UPS Management Software and the Interfaces based on the possible applications:1) The basic autoshutdown software - This UPS management software alerts user about power status and notices the user to save and shutdown just before the battery back up gets over. Also it saves most of the general programs and shuts down the PC safely, if the user fails to do so. But the back up time is not calculated based on the actual battery voltage and instead it relies on the time entered during installation. The RS232 interface details will be given free with the software. There are two interface protocols available. One is ‘Megatech’ protocol which is generally available with the imported UPS etc. The other is our own protocol –‘Unipar Protocol’ and the hardware for this can be bought from us. Remote monitoring of the UPS is another feature of this version. 3) The UPS as a network component : If the UPS has to be part of a LAN, then an Ethernet adaptor meant for UPS application has to be used along with the RS232 and the software. We shall connect you to the vendors for this card. In this case the software works with all the features of SNMP protocol, even without this protocol. Remote monitoring of UPS is possible in this case as well. 4) SNMP - Simple Network Management Protocol is a protocol of network communication. In an SNMP environment, you will need to buy the SNMP interface card/technology also, from us, for the UPS to be made into a part of the network. Alternately, if you have the imported SNMP interface card with you, our software can communicate with the same, if you opt for this option. UPS NetManager |